New Items

Approx. Rs 99,000 / PieceGet Latest Price

Hexprog Chip Tuning is the professional tool you will need to repair, clone and make chip tuning for wide range of Ecus/Tcus.

Hexprog covers a wide range of Ecus and Tcus from different manufacturers and different brands  Hexprog Key Features

 Master version. One License for all protocols On bench and OBD.

 Supports one of the largest Ecu/Tcu list in Cars and Trucks.

 Reads all BMW long ISN from BMW DME and DDE including MD1 and MG1 in F/G series.

 Supports online services like IMMO OFF, DPF OFF, EGR OFF, Addblue,...etc.

 All adapters and modules are included when you order Hexprog. On Bench Chip Tuning/Ecu Cloning

You can read and write P-Flash, D-Flash, External Flash, and external EEPROM with the option of automatically checksum correction, you will have two methods in most of Ecus:

Factory mode: with this option you don’t have to open the Ecu cover. Just plug some wires for power and signals and you are ready to go.

Boot mode: Opening the Ecu is mandatory to connect the boot wire on the Ecu board. This method is useful when the Ecu is not responding.  BD Chip tuning

Hexprog starts supporting OBD functions in early 2021, It supports read/write the map area, (virtual read is supported too). It also includes important functions in some Ecus, like VIN Changing, Coding backup/restore and Fault codes read/erase.

Microtronik has a vast experience in all types of car Ecus flashing and coding, we deployed this experience in Hexprog to produce one of the safest programming tools by OBD.

Additional Information:

Approx. Rs 72,000 / PieceGet Latest Price

1. Support Audi/VW ECU cloning via pinout mode.
2. Bosch EDC17, MED17 / ME17, and SIEMENS Pcr2.1 (also with Pinout open) to read and write in Bench mode.
3. Chip Tuning Kit KT200 ECU Programmer Vehicle List is constantly updated and stays ahead of the industry.
4. The KT200 ECU programmer software allows you to write (forced cloning)
   Without testing forcibly and supports forced reading and writing of unknown ECUs with supported chip models.
5. Covering a full range of German, ECU programmer, Japanese, American, and Chinese models.
6. Supports OBD BOOT BDM JTAG mode
7. The same as KTM200/ECUTuner
8. Read and write ECU/TCU data
9. Supports large amounts of TCUs, i.e Volvo MPS6, VAG DQ400e/SQ100, Jeep 9H28 TCUs
10. Supports VR Reading
11. TRW EMS 2.2 EMS 2.3, EMS S8, PCR 2.1 OBD unlock, etc tested working

1. ECU/TCU Cloning
2. Read and write ECU data
3. ECU maintenance engineering
4. Read and write the whole ECU/ECU data
5. Read OBD2 (Currently supports 2008-2020 vehicles only)
6. Checksum correction
7. Read and write default data
8. Supports online update
9. Read and write the entire TCU (Micro + EEPROM)
10. It must work online (online access server)
11. ECU Remapping
12. KT200 ECU Programmer read and program?

1. CAR
2. TRUCK MOTORBIKE
3. TRACTOR
4. BOAT
5. KT200 ECU Programmer Packing List: Master x 1

• BENCH BOX x1
• OBD wires x 2
• Pinout line x 1
• BDM adapter x4
• Transfer cables x 3
• Power wire x 4
• Set of resistors x1
• Adapter plugs x 4 sets
• Power adapters x 5 sets

Additional Information:

Approx. Rs 6,000 / PieceGet Latest Price

Additional Information:

Approx. Rs 55,000 / PieceGet Latest Price

Additional Information:

Approx. Rs 6,000 / PieceGet Latest Price

Additional Information:

Approx. Rs 28,000 / PieceGet Latest Price

The OpenPort 2.0 is our newest tuning tool hardware that is capable of communicating with most OBDII compliant vehicles using a standard J2534 interface. Combined with our EcuFlash software, the OpenPort 2.0 is capable of reflashing a large number of newer Subaru and Mitsubishi vehicles, and support for other cars is in progress.

We include a USB cable with each OpenPort, which is all the hardware you'll need unless you have one of the few vehicles that require a separate reflash adapter. For Subaru you'll only need a reflash adapter for the 2001 through 2005 WRX, but not STi, unless you're working on an early non USDM STi in which case you made need one of our WRX adapters. No other Subaru vehicles require reflash adapters including Forester, Baja, Legacy, or naturally aspirated Impreza models. For Mitsubishi, you'll need the adapter for most pre CAN vehicles which include the 5-9 Evo. Choose the adapter you need from the 'Reflash Adapters' drop down list on the right side of this page.

• 72Mhz 32-bit processor
• USB 2.0 full speed device (USB-A/Mini cable included)
• Field upgradeable software
• Supports these major OBD protocols:
  • CAN 2.0 (CAN/ISO15765)
  • K-line (ISO9141/ISO14230(KWP2000)/dual K line)
• J2534 PassThru support with Windows DLL
• Standalone datalogs to microSD / microSDHC card without a laptop
• Able to apply GND or 5V-25V to OBD pins 1,3,9,11,12,13 or AUX 2.5mm stereo connector
• Able to log from Innovate Motorsports 2.5mm stereo MTS data bus
• RGB status LEDs
• Supports 12 volt vehicles (support for 24 volt vehicles coming soon in a future hardware revision)

Designed, manufactured, assembled, and tested in San Francisco, USA

Tactrix Openport 2.0 + ECU Flash Tactrix #Openport 2.0 ECU Chip Tunning Tactrix 2.0 port 2.0 suitable for  Mahindra software

Technical information

Technical Details

72Mhz 32-bit processor;

USB 2.0 full speed device (USB-A/Mini cable included);

Field upgradeable software;

Supports these major OBD protocols:

CAN 2.0 (CAN/ISO15765);

K-line (ISO9141/ISO14230(KWP2000)/dual K line);

J2534 PassThru support with Windows DLL;

Standalone datalogs to microSD / microSDHC card without a laptop;

Able to apply GND or 5V-25V to OBD pins 1,3,9,11,12,13 or AUX 2.5mm stereo connector;

Able to log from Innovate Motorsports 2.5mm stereo MTS data bus;

RGB status LEDs.

It has been successfully tested with the following software: Chiploader, MMC Flasher, Multiflasher, PCM Flash, Toyota Techstream and many others.

Additional Information:

Approx. Rs 4,999 / PieceGet Latest Price

Approx. Rs 7,500 / PieceGet Latest Price

INSITE 8.9  Diagnosis Software works with Cummins electronic control modules (ECMs) to diagnose and troubleshoot engine problems, store and analyze historical information about an engine, and modify an engine’s operating parameters.

 INSITE Professional Edition software supplies engine information quickly, enabling you to download calibrations. Retrieve current or recorded data about an engine, alter ECM settings, store data for viewing later, and analyze data to monitor and assess the operation of your engine.

This diagnostic software performs engine diagnostics and displays electronic engine information on your PC. With step-by-step diagnostics, integrated engine drawings, and schematic diagrams, working with INSITE is easy. Using this software application will reduce troubleshooting time, errors, and incorrect procedures, and quickly get your vehicle back within proper operating parameters.
8.7 PRO version also has the following capabilities:

– Diagnostics

– Edit parameters

– Fleet Calibration

– Clear Faults

– Programming & Change HP

– Remove ECM Password  by  ECM Password Removal (Zap-IT)

Other Features:

-Vehicle information
-Parameter and function settings
-Accurate fault diagnosis
-Complete wiring and location diagram on map sensors
-Troubleshooting related information
-fault information
-Fault codes and diagnosis based on symptoms
-Diagnostic test engine
-Tools to create templates for a group of vehicles
-Fleet management / program controllers
-Tracking Information Audit
-Greater ECM security

Region: All regions
Languages: English

Operating System (OS) : Windows 10,8.1. 8, 7  x64 64-bit or x86 32 bit

Media version: cummins insite download

Approx. Rs 35,000 / PieceGet Latest Price

Features:

Update Regular

On Table Key Programming(Coupler to Coupler)Product DescriptionCar Simulator Tool Which Provide Car Technicians To Diagnose Electrical Problems Without Having A Car. This Tool Acts As A Virtual Car Simulator That Allows The Technician To Connect Various Electrical Systems Of A Car Like Ecm, Speedometer, Key, Etc. Once The Faulty Electronic Systems Are Connected With Each Other, They Can Be Diagnosed Easily And Can Be Check Without A Physical Car Present. This Tool Reduces The Hassle Of Going To Car Each And Every Time For Diagnosing Every Single Problem At A Time. Using This Tool You Can Diagnose Every Problems And Rectify Them Without The Need Of A Car. This Will Reduce Your Work And Your Time. A Perfect Tool To Efficiently Diagnose Car Problems Without Having A Car !

Additional Information:

Approx. Rs 15,000 / PieceGet Latest Price

Additional Information:

Approx. Rs 17,000 / PieceGet Latest Price

Additional Information: