Techno India

Mini crdi simulator high pressure common rail injector tester can drive common rail injectors such as for Bosch,  Denso,,  Delphi, Siemens & CAT, etc. The test conditions can be set by the user according to their actual conditions, which is convenient for maintenance personnel to the high pressure common rail injector. Judgment and maintenance of working conditions under different working conditions.
Product main function
Mini crdi simulator: Suitable to calibrate BOSCH DELPHI DENSO SIEMENSE & PZ1.Support testing electromagnetic high-pressure common rail injector        2.Pulse width adjustable range: 0  6000us; 3.Frequency adjustable range: 1  30Hz;For more information please contact us

AHE Common rail injector  tester CRI230
CRI220/230 high pressure common rail injector tester can drive common rail injectors such as Bo.sch, Den.so, Del.phi, CA.T, etc. The test conditions can be set by the user according to their actual conditions, which is convenient for maintenance personnel to the high pressure common rail injector. Judgment and maintenance of working conditions under different working conditions.
MAIN FUNCTIONS:Support magnetic injectors(BOSCH, DENSO, DELPHI, CAT);Overcurrent and short circuit protection; Injector dynamic stroke measurement AHE, only supported by CRI230

more details please contact us

Product Description:
CRI 250 piezoelectric injector tester can drive the piezoelectric injector and test the AHE, resistance; Capacitance; Resistance;1. Piezoelectric crystal resistance;2. Piezoelectric crystal capacitance;3. Insulation resistance of piezoelectric oil injector;4. Dynamic travel of piezoelectric crystal;5. Drive the piezoelectric oil injector;
Function . ON/OFF Knob，
a.Press the ON/OFF knob：Run or stop,The lower right corner of the screen shows the current status:ON/OFF；b.Turn the ON/OFF knob left and right:In mode 1, 3, 4, adjustable voltage value: 0 ～ 178V;In mode 5, the pulse width can be adjusted; 0 ～ 5000us2. MODE Knob3. Press the MODE knob: Enter the submenu, or return to the main menu；4. In mode 5 rotate the MODE knob left or right to adjust the injection frequencyBack View① Power socket: AC: 100-240V;② Piezo injector drive harness;

CR 700 is a comprehensive common rail tester that can drive common rail injector (piezoelectric, electromagnetic) and common rail pump. It can test various brands such as BOSCH, DENSO, DELPHI and other different brands of injectors, common rail pumps, and HEUI pumps. Rich displays content, simple and clear key operation; greatly reduce the user's difficulty. The product adopts industrial-grade design specifications and can operate normally under high load conditions for a long time.Key function descriptionIDNameDescription1width +Increase the injector drive pulse width
2width -Reduce injector drive pulse width
3Frequency +Injector mode: increase the drive frequency of the injectorPiezo AHE mode: increase the driving voltageElectromagnetic AHE mode: increase the drive current
4Frequency -Injector mode: reduce the drive frequency of the injectorPiezo AHE mode: reduce the driving voltageElectromagnetic AHE mode: reduce drive current
5PiezoStart Piezo Injector Drive Output
6EMStart electromagnetic injector drive output
7AHEEnter AHE drive mode
8BoschSelect Bosch drive type, only EM mode is valid
9DensoSelect Denso drive type, only EM mode is valid
10DelphiSelect Delphi drive type, only EM mode is valid
11)ZME ResistanceEnter ZME resistance measurement mode
12)Monitor VoltageSwitch the currently displayed monitoring voltagePower supply voltageBoost power supplyZME Driving Average voltage
13)Current +Current Mode: Increase ZME CurrentDuty Cycle Mode: Increase ZME Drive Duty Cycle
14)Current -Current Mode: Reduce ZME CurrentDuty Cycle Mode: Reduce ZME Drive Duty Cycle
15)Set CurrentSet ZME to constant current drive mode
16)Set DutySet ZME to regular duty cycle setting modeDisplay Content DescriptionIDName
1)Pulse Widthinjector drive pulse width
2)Frequencyinjector drive frequency
3)Inductance Resistance DTCInjector works normally, the inductance of the injector is displayed;ZME resistance measurement mode displays the ZME measurement resistance;The Tester has an error, display the error code;
4)VoltageVoltage value of the currently selected type
5)Current/Duty CycleCurrent mode displays the set current, and dutycycle mode displays the set PWM duty cycle
6)Actual CurrentThe actual current of ZME
Indicator lights function descriptionIDName1)InjectionDisplay Injector Status Error Code Pattern
2)injection InductorDisplay Injector Inductance Mode
3)ZME ResistorDisplay ZME resistance mode
4)ZME VoltageDisplay ZME average drive voltage mode
5)VoltageDisplay supply voltage mode
6)Boost VoltageDisplay boost voltage mode
Interface function descriptionIDName1)EM/PiezoInjector drive output interface
2)ZMEZME driver output interface
Error code descriptionIDName1)1001Injector open circuit
2)1002Injector short circuit
3)1003Injector load abnormal
4)1004Injector drive circuit abnormal
5)2001ZME open circuit
6)2002ZME short circuit
7)2003ZME load abnormality
8)2004ZME drive circuit is abnormal
9)3001Power supply voltage abnormal
10)3002Boost circuit abnormalTest operation processElectromagnetic injector drivePiezo Injector DriveAHE FunctionPump valve drive functionPump valve resistance measurementWhen stored for a long time and not in use, it is recommended to turn on the power for no less than 4 hours once every three months;For long-term storage should avoid direct light, and should be stored at temperature of 0°C~45°C The actual environment may involve high voltage and mechanical transmission, check whether the supporting equipment meets the safety regulations before use;Try to avoid misconnection of the interface, short circuit , contact with the live load and other abnormal situations, may cause damage to the tester;If the screen does not light up, first check whether the power supply voltage is normal and whether the power light is on.

GIT600  Item Feature:
     This tester can diagnose injector problems, you can use it on each injector individually to test stuck, leaking or burnt-out.     it can set  Frequency and width ,also it preset  4 test mode .it can help  you identify the injector good or not      It can work with any fuel pressure tester together.     It can test 4 injectors at once .     It can test GDI Injector(Gasoline direct injecton engine) and gasoline injector 

GIT600 Operation Instructions:

       Turn off the vehicle's engine 
       Connect Black / Red Clip to the Negative / Positive terminal of battery  
       Connect pulse output terminal to the fuel injector
       Press the "SELECT" key to select the desired pulse mode,and use knob to turn up or down the  Frequency or width
       Press the "START"key, the tester will output pulse to the injector, and then the pulse signal indicator will light as indication 
GIT600 specification:

Power Supply: AC110-220(50/60HZ)Screen:2.8inch 230*240LCD displayPluse frequency: 1-50hzPluse width :0.5-9.9msSize: 260*200*110mm (for main body only)Weight: about 2.5kg